F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

119
The following matrix shows the ppp accm command and firewalls and UTM devices compatibility:
Hardware Command com
p
atible
F1000-A-EI/F1000-S-EI No
F1000-E No
F5000 No
Firewall module No
U200-A No
U200-S Yes
Examples
# Set the ACCM value sent to the peer on Dialer 1 to 0x01010101.
<Sysname> system-view
[Sysname] interface Dialer 1
[Sysname-Dialer 1] ppp accm 01010101
ppp account-statistics enable
Use ppp account-statistics enable to enable PPP traffic statistics collection.
Use undo ppp account-statistics enable to disable PPP traffic statistics collection.
Syntax
ppp account-statistics enable [ acl { acl-number | name acl-name } ]
undo ppp account-statistics enable
Default
PPP traffic statistics collection is disabled.
Views
Interface view
Default command level
2: System level
Parameters
acl: Generates PPP accounting statistics for traffic that matches the configured ACL. If no ACL is
configured, the device generates PPP accounting statistics for all traffic.
acl-number: ACL number, in the range of 2000 to 3999, where:
• 2000 to 2999 are numbers for basic IPv4 ACLs.
• 3000 to 3999 are numbers for advanced IPv4 ACLs.
name acl-name: Specifies an ACL by its name. The acl-name represents the name of an IPv4 ACL, a
case-sensitive string that starts with an English letter and contains 1 to 63 characters. To avoid confusion,
do not use the English word all as an IPv4 ACL name.
Examples
# Enable PPP traffic statistics collection on interface Virtual-Template 1.
<Sysname> system-view