F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

121
Default command level
2: System level
Parameters
request: Specifies that the local end include the ACFC option in its transmitted LCP negotiation requests.
Usage guidelines
The following matrix shows the ppp acfc local command and firewalls and UTM devices compatibility:
Hardware Command com
p
atible
F1000-A-EI/F1000-S-EI No
F1000-E No
F5000 No
Firewall module No
U200-A No
U200-S Yes
Examples
# Configure port Dialer 1 to send ACFC requests to its peer in PPP negotiation.
<Sysname> system-view
[Sysname] interface Dialer 1
[Sysname-Dialer1] ppp acfc local request
ppp acfc remote
Use ppp acfc remote to configure how the local end handles the ACFC requests received from the remote
peer.
Use undo ppp acfc remote to restore the default.
Syntax
ppp acfc remote { apply | ignore | reject }
undo ppp acfc remote
Default
The device accepts ACFC requests received from a remote peer, but does not perform ACFC on frames
sent to the peer.
Views
Interface view
Default command level
2: System level
Parameters
apply: Configures the local end to accept ACFC requests received from the remote peer and to perform
ACFC on frames sent to the peer.
ignore: Configures the local end to accept ACFC requests received from the remote peer, but not to
perform ACFC on frames sent to the peer.