F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

122
reject: Configures the local end to reject ACFC requests sent from the remote peer.
Usage guidelines
The following matrix shows the ppp acfc remote command and firewalls and UTM devices compatibility:
Hardware Command com
p
atible
F1000-A-EI/F1000-S-EI No
F1000-E No
F5000 No
Firewall module No
U200-A No
U200-S Yes
Examples
# Configure port Dialer 1 to accept ACFC requests received from the remote peer and to perform ACFC
on frames sent to the peer.
<Sysname> system-view
[Sysname] interface Dialer 1
[Sysname-Dialer1] ppp acfc remote apply
ppp authentication-mode
Use ppp authentication-mode to configure the PPP authentication mode.
Use undo ppp authentication-mode to disable PPP authentication.
Syntax
ppp authentication-mode { chap | ms-chap | ms-chap-v2 | pap } * [ [ call-in ] domain isp-name ]
undo ppp authentication-mode
Default
PPP authentication is disabled.
Views
Interface view
Default command level
2: System level
Parameters
chap: Uses CHAP authentication.
ms-chap: Uses MS-CHAP authentication.
ms-chap-v2: Uses MS-CHAP-V2 authentication.
pap: Uses PAP authentication.
call-in: Authenticates the call-in users only.
domain isp-name: Specifies the domain name for authentication, a case-insensitive string of 1 to 24
characters.