F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

130
ppp pfc remote
Use ppp pfc remote to configure how the local end handles the PFC requests received from the remote
peer.
Use undo ppp pfc remote to restore the default.
Syntax
ppp pfc remote { apply | ignore | reject }
undo ppp pfc remote
Default
The device accepts PFC requests received from a remote peer, but does not perform PFC on frames sent
to the peer.
Views
Interface view
Default command level
2: System level
Parameters
apply: Configures the local end to accept PFC requests received from the remote peer and to perform
PFC on frames sent to the peer.
ignore: Configures the local end to accept PFC requests received from the remote peer, but not to perform
PFC on frames sent to the peer.
reject: Configures the local end to reject PFC requests sent from the remote peer.
Usage guidelines
The following matrix shows the ppp pfc remote command and firewalls and UTM devices compatibility:
Hardware Command com
p
atible
F1000-A-EI/F1000-S-EI No
F1000-E No
F5000 No
Firewall module No
U200-A No
U200-S Yes
Examples
# Configure interface Virtual-Template 1 to accept PFC requests received from the remote peer and to
perform PFC on frames sent to the peer.
<Sysname> system-view
[Sysname] interface Virtual-Template 1
[Sysname-Virtual-Template1] ppp pfc remote apply