F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

131
ppp timer negotiate
Use ppp timer negotiate to set the PPP negotiation timeout time.
Use undo ppp timer negotiate to restore the default.
Syntax
ppp timer negotiate seconds
undo ppp timer negotiate
Default
The PPP negotiation timeout time is three seconds.
Views
Interface view
Default command level
2: System level
Parameters
seconds: Negotiation timeout time to be set, in the range of 1 to 10 (in seconds). In PPP negotiation, if
the local device receives no response from the peer during this period after it sends a packet, the local
device sends the last packet again.
Examples
# Set the PPP negotiation timeout time to five seconds.
<Sysname> system-view
[Sysname] interface Virtual-Template 1
[Sysname-Virtual-Template1] ppp timer negotiate 5
ppp user bind enable
Use ppp user bind enable to enable PPP user binding.
Use undo ppp user bind enable to restore the default.
Syntax
ppp user bind enable
undo ppp user bind enable
Default
PPP user binding is disabled.
Views
VT interface view
Default command level
2: System level
Examples
# Enable PPP user binding.
<Sysname> system-view
[Sysname] interface Virtual-Template 1