F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

132
[Sysname-Virtual-Template1] ppp user bind enable
Related commands
ppp user bind virtual-template
ppp user bind virtual-template
Use ppp user bind virtual-template to configure a PPP user binding rule.
Use undo ppp user bind virtual-template to remove a PPP user binding rule.
Syntax
ppp user bind virtual-template number domain isp-name
undo ppp user bind virtual-template number
Default
No PPP user binding rule is configured.
Views
VT interface view
Default command level
2: System level
Parameters
number: Number of the VT interface, in the range of 0 to 1023.
domain isp-name: Specifies the ISP domain name, a case-insensitive string of 1 to 24 characters. The
characters cannot include forward slash (/), backslash (\), colon (:), asterisk (*), question mark (?), left
angle bracket (<), right angle bracket (>), or at sign (@).
Examples
# Configure a PPP user binding rule.
<Sysname> system-view
[Sysname] interface Virtual-Template 1
[Sysname-Virtual-Template1] ppp user bind Dialer 2 domain abcd
Related commands
ppp user bind enable
remote address
Use remote address to set the IP address to be assigned to the peer device, or to specify the address pool
used for assigning an IP address to the peer device.
Use undo remote address to cancel the IP address configured to be assigned to the peer device.
Syntax
remote address { ip-address | pool [ pool-number ] }
undo remote address
Default
An interface does not assign IP addresses to the peer device.