F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

134
undo timer hold
Views
Interface view
Default command level
2: System level
Parameters
seconds: Interval (in seconds) for sending keepalive packets, in the range 0 to 32767. A value of 0
disables keepalive packet sending.
Usage guidelines
Because a slow link takes a long period of time to transmit large packets, the sending and receiving of
keepalives may be delayed so long that one end cannot receive keepalive packets from the peer for a
specific number of keepalive periods and shuts down the link. To prevent this, set the interval for sending
keepalive packets to a relatively longer length of time.
Examples
# Set the interval for sending keepalive packets to 20 seconds on interface Virtual-Template 1.
<Sysname> system-view
[Sysname] interface Virtual-Template 1
[Sysname-Virtual-Template1] timer hold 20
VT interface configuration commands
broadcast-limit link
Use broadcast-limit link to set the maximum number of links that can be used for transmitting multicast
packets or broadcast packets for the VT interface.
Use undo broadcast-limit link to restore the default.
Syntax
broadcast-limit link number
undo broadcast-limit link
Default
The maximum number of links that can be used for transmitting multicast or broadcast packets is 30 for
a VT interface.
Views
VT interface view
Default command level
2: System level