F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

136
description
Use description to set the description for the VT or MP-group interface.
Use undo description to restore the default.
Syntax
description text
undo description
Default
A VT or MP-group interface is described in the form of interface name Interface (for example,
Virtual-Template1 Interface).
Views
VT interface view
Default command level
2: System level
Parameters
text: Interface description, a case-sensitive character string of 1 to 80 characters.
Examples
# Set the description for interface VT 10 to virtual-interface.
<Sysname> system-view
[Sysname] interface Virtual-Template 10
[Sysname-Virtual-Template10] description virtual-interface
display interface virtual-template
Use display interface virtual-template to display information about a VT interface.
Syntax
display interface virtual-template number [ brief ] [ | { begin | exclude | include } regular-expression ]
display interface [ virtual-template ] [ brief [ down ] ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
number: Number of an existing VT interface.
brief: Displays brief interface information. If you do not specify this keyword, this command displays
detailed interface information.
down: Displays information about interfaces in DOWN state and the causes. If you do not specify this
keyword, this command displays information about interfaces in all states.