F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

138
Field Descri
p
tion
Line protocol current state Data link layer state: UP or DOWN.
Description Description string of the interface.
The Maximum Transmit Unit MTU of the interface.
Hold timer Interval at which the current interface sends keepalive packets.
Internet protocol processing Network layer state: enabled or disabled.
LCP initial LCP negotiation is complete.
Physical Physical type of the interface.
Output queue : (Urgent queue :
Size/Length/Discards)
Output queue : (Protocol queue :
Size/Length/Discards)
Output queue : (FIFO queuing :
Size/Length/Discards)
Traffic statistics of the interface output queues.
Last clearing of counters: Never
Last time when statistics on the interface were cleared. Never
indicates that statistics on the interface were never cleared.
Last 300 seconds input: 0 bytes/sec 0
packets/sec
Last 300 seconds output: 0 bytes/sec
0 packets/sec
Average rate of input packets and output packets in the last 300
seconds.
0 packets input, 0 bytes, 0 drops
Total number of inbound packets of the interface (in the number of
packets and in bytes), and the number of packets dropped among
the inbound packets.
0 packets output, 0 bytes, 0 drops
Total number of outbound packets of the interface (in the number of
packets and in bytes), and the number of packets dropped among
the outbound packets.
The brief information of interface(s)
under route mode
Brief information about Layer 3 interfaces.
Link: ADM - administratively down;
Stby - standby
Link status:
• ADM—The interface has been administratively shut down. To
recover its physical state, execute the undo shutdown command.
• Stby—The interface is operating as a standby interface. To see its
active interface, use the display standby state command in High
Availability Command Reference.
Protocol: (s) - spoofing
If the network layer protocol state of an interface is shown as UP, but
its link is an on-demand link or is not present at all, its protocol
attribute includes the spoofing flag (an s in parentheses).
Interface Abbreviated interface name.
Link
Physical link state of the interface:
• UP—The link is up.
• ADM—The link has been administratively shut down. To recover
its physical state, use the undo shutdown command.
Protocol Protocol connection state of the interface: UP(s).
Main IP Main IP address of the interface.