F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

140
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
VA interfaces are created automatically by the system. They use the settings of the corresponding VT
interfaces. A VA interface can be removed due to failures of lower layer connections or user intervention.
Examples
# Display information about all the VA interfaces that are formed based on VT 1.
<Sysname> display virtual-access vt 1
Virtual-Template1:0 current state: UP
Line protocol current state: UP
Description: Virtual-Template1:0 Interface
The Maximum Transmit Unit is 1500
Internet protocol processing : disabled
Link layer protocol is PPP
LCP opened, MP opened, IPCP opened, OSICP opened
Physical is MP, baudrate: 64000 bps
Output queue : (Urgent queuing : Size/Length/Discards) 0/100/0
Output queue : (Protocol queuing : Size/Length/Discards) 0/500/0
Output queue : (FIFO queuing : Size/Length/Discards) 0/75/0
Last 300 seconds input: 0 bytes/sec 0 packets/sec
Last 300 seconds output: 0 bytes/sec 0 packets/sec
520 packets input, 44132 bytes, 0 drops
527 packets output, 44566 bytes, 4 drops
interface virtual-template
Use interface virtual-template to create a VT interface and enter its view. If the VT interface already exists,
enter its view directly.
Use undo interface virtual-template to remove a VT interface.
Syntax
interface virtual-template number
undo interface virtual-template number
Views
System view
Default command level
2: System level
Parameters
number: VT interface number, in the range of 0 to 1023.