F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

141
Usage guidelines
To remove a VT interface, make sure all the corresponding VA interfaces are removed and the VT
interface is not in use.
Examples
# Create interface VT 10.
<Sysname> system-view
[Sysname] interface Virtual-Template 10
[Sysname-Virtual-Template10]
mtu
Use mtu to set the MTU size of the interface.
Use undo mtu to restore the default.
Syntax
mtu size
undo mtu
Default
The MTU of an interface is 1500 bytes.
Views
VT interface view
Default command level
2: System level
Parameters
size: MTU in bytes, in the range of 128 to 1500.
Examples
# Set the MTU of VT 10 to 1200 bytes.
<Sysname> system-view
[Sysname] interface Virtual-Template 10
[Sysname-Virtual-Template10] mtu 1200
reset counters interface virtual-template
Use reset counters interface virtual-template to clear statistics on VT interfaces.
Syntax
reset counters interface [ virtual-template [ interface-number ] ]
Views
User view
Default command level
2: System level