F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

158
undo dhcp server ip-pool pool-name
Default
No DHCP address pool is created.
Views
System view
Default command level
2: System level
Parameters
pool-name: Specifies the name for the global address pool, a string of 1 to 35 characters used to
uniquely identify this pool.
extended: Specifies the address pool as an extended address pool. If you do not specify this keyword,
the address pool is a common address pool.
Examples
# Create the common address pool identified by 0.
<Sysname> system-view
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0]
Related commands
• dhcp enable
• display dhcp server tree
dhcp server ping packets
Use dhcp server ping packets to specify the maximum number of ping packets.
Use undo dhcp server ping packets to restore the default.
Syntax
dhcp server ping packets number
undo dhcp server ping packets
Default
The maximum number of ping packets is 1.
Views
System view
Default command level
2: System level
Parameters
number: Specifies the maximum number of ping packets, in the range of 0 to 10. The value of 0 means
that the DHCP server does not perform address conflict detection.
Usage guidelines
To avoid IP address conflicts, the DHCP server checks whether an IP address is in use before assigning
it to a DHCP client.