F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

165
pool [ pool-name ]: Displays the binding information for the specified IP address pool. The pool name is
a string of 1 to 35 characters. If you do not specify any pool name, this command displays the binding
information about all address pools.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
In the command output, the lease duration of a used static binding is displayed as Unlimited instead of
the actual lease duration. To view the actual lease duration, use the display this command in DHCP
address pool view.
Examples
# Display the binding information about all DHCP address pools.
<Sysname> display dhcp server ip-in-use all
Pool utilization: 0.39%
IP address Client-identifier/ Lease expiration Type
Hardware address
10.1.1.1 4444-4444-4444 NOT Used Manual
10.1.1.2 3030-3030-2e30-3030- May 1 2009 14:02:49 Auto:COMMITTED
662e-3030-3033-2d45-
7468-6572-6e65-7430-
2f31
--- total 2 entry ---
Table 34 Command output
Field Descri
p
tion
Pool utilization
Utilization rate of IP addresses in a DHCP address pool, which is the
ratio of assigned IP addresses to assignable IP addresses in the
DHCP address pool.
• When the binding information about all DHCP address pools is
displayed, this field displays the total utilization rate of IP
addresses in all DHCP address pools.
• When the binding information about a specific DHCP address
pool is displayed, this field displays the utilization rate of IP
addresses in the DHCP address pool.
• When the binding information about a specific IP address is
displayed, this field is not displayed.
IP address Bound IP address.
Client-identifier/Hardware address Client's ID or MAC of the binding.