F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

172
Default command level
2: System level
Parameters
ip-address&<1-8>: Specifies excluded IP addresses. &<1-8> indicates that you can specify up to eight IP
addresses, separated by spaces.
all: Excludes all IP addresses from dynamic allocation.
Usage guidelines
Only the extended address pools support this command.
IP addresses specified with the forbidden-ip command in DHCP address pool view are excluded from
dynamic address allocation in the current extended address pool only. They are assignable in other
address pools.
You can exclude multiple IP address ranges from dynamic allocation.
Examples
# Exclude IP addresses 192.168.1.3 and 192.168.1.10 from dynamic allocation for extended address pool
0.
<Sysname> system-view
[Sysname] dhcp server ip-pool 0 extended
[Sysname-dhcp-pool-0] forbidden-ip 192.168.1.3 192.168.1.10
Related commands
• dhcp server ip-pool
• display dhcp server forbidden-ip
gateway-list
Use gateway-list to specify gateway addresses in a DHCP address pool.
Use undo gateway-list to remove specified gateway addresses specified for the DHCP client from a
DHCP address pool.
Syntax
gateway-list ip-address&<1-8>
undo gateway-list { ip-address | all }
Default
No gateway address is specified.
Views
DHCP address pool view
Default command level
2: System level
Parameters
ip-address&<1-8>: Gateway IP address. &<1-8> means you can specify up to eight gateway addresses
separated by spaces.
all: Specifies all gateway IP addresses to be removed.