F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

180
Default command level
1: Monitor level
Examples
# Clear the statistics of the DHCP server.
<Sysname> reset dhcp server statistics
Related commands
display dhcp server statistics
static-bind client-identifier
Use static-bind client-identifier to specify the client ID of a static binding in a DHCP address pool.
Use undo static-bind client-identifier to remove the client ID of a static binding from a DHCP address
pool.
Syntax
static-bind client-identifier client-identifier
undo static-bind client-identifier
Default
No client ID is specified.
Views
DHCP address pool view
Default command level
2: System level
Parameters
client-identifier: The client ID of a static binding, a string with 4 to 160 characters in the format of H-H-H…,
each H indicates 4 hex digits except the last H indicates 2 or 4 hex digits. For example, aabb-cccc-dd
is a valid ID, but aabb-c-dddd and aabb-cc-dddd are both invalid.
Usage guidelines
Use the static-bind client-identifier command together with the static-bind ip-address command to
accomplish a static binding configuration.
The ID of the static binding of a client must be identical to the ID displayed by using the display dhcp
client verbose command on the client. Otherwise, the client cannot obtain an IP address.
If you use the static-bind client-identifier or static-bind mac-address command multiple times, the most
recent configuration takes effect.
Examples
# Bind the client ID aaaa-bbbb to the IP address 10.1.1.1 with the mask 255.255.255.0 in DHCP address
pool 0.
<Sysname> system-view
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] static-bind ip-address 10.1.1.1 mask 255.255.255.0
[Sysname-dhcp-pool-0] static-bind client-identifier aaaa-bbbb