F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

217
My 0 static 1.1.1.1
Aa 0 static 2.2.2.4
Table 47 Command output
Field Descri
p
tion
Host Host name.
Age
Time to live. The value of 0 means that the static mapping never ages out.
You can only manually remove the static mappings between host names and IPv4
addresses.
Flags
Indicates the mapping type.
Static represents static IPv4 domain name resolution.
Address Host IPv4 address.
dns domain
Use dns domain to configure a domain name suffix. The system can automatically add the suffix to part
of the domain name you entered for resolution.
Use undo dns domain to delete a domain name suffix (with a domain name suffix specified) or all
domain name suffixes (with no domain name suffix specified).
Syntax
dns domain domain-name
undo dns domain [ domain-name ]
Default
No domain name suffix is configured. Only the provided domain name is resolved.
Views
System view
Default command level
2: System level
Parameters
domain-name: Domain name suffix, consisting of character strings separated by a dot (for example,
aabbcc.com). Each separated string contains no more than 63 characters. A domain name suffix may
include case-insensitive letters, digits, hyphens (-), underscores (_), and dots (.), with a total length of 238
characters.
Usage guidelines
The domain name suffix configured with the dns domain command is applicable to both IPv4 DNS and
IPv6 DNS.
You can configure a maximum of 10 domain name suffixes.
Examples
# Configure com as a DNS suffix.
<Sysname> system-view
[Sysname] dns domain com