F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

256
Syntax
display qos policy { system-defined | user-defined } [ policy-name [ classifier classifier-name ] ] [ |
{ begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
system-defined: Specifies the system-defined policy.
The following matrix shows the keyword system-defined and firewalls and UTM compatibility:
Hardware Ke
y
word com
p
atible
F1000-A-EI/F1000-S-EI No
F1000-E Yes
F5000 Yes
Firewall module Yes
U200-A No
U200-S No
user-defined: Displays user-defined QoS policies.
policy-name: Specifies a QoS policy by its name, a string of 1 to 31 characters. If no policy is specified,
this command displays configuration information of all the policies.
classifier-name: Specifies a class by its name, a string of 1 to 31 characters.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display the configuration information of user-defined QoS policies.
User Defined QoS Policy Information:
Policy: user1
Classifier: traffic1
Behavior: behavior1
Committed Access Rate:
CIR 200 (kbps), CBS 50000 (byte), EBS 0 (byte)
Green Action: pass
Red Action: remark ip-precedence 0 and pass