F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

290
<Sysname> system-view
[Sysname] rip 1
[Sysname-rip-1] import-route static cost 4
# Configure a default cost of 3 for redistributed routes.
[Sysname-rip-1] default cost 3
# Redistribute OSPF routes with the cost being the default cost.
[Sysname-rip-1] import-route ospf
Related commands
default cost
maximum load-balancing (RIP view)
Use maximum load-balancing to specify the maximum number of equal-cost multi-path (ECMP) routes for
load balancing.
Use undo maximum load-balancing to restore the default.
Syntax
maximum load-balancing number
undo maximum load-balancing
Default
The maximum number of ECMP routes depends on the device model.
Views
RIP view
Default command level
2: System level
Parameters
number: Specifies the maximum number of ECMP routes.
The following matrix shows the value range and default values for the number argument on different
firewalls and UTM devices:
Hardware Value ran
g
e Default value
F1000-A-EI/F1000-S-EI 1 to 8 8
F1000-E 1 to 8 8
F5000 1 to 16 16
Firewall module 1 to 8 8
U200-A 1 to 8 8
U200-S 1 to 8 8
Examples
# Specify the maximum number of ECMP routes as 2.
<Sysname> system-view
[Sysname] rip