F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

300
Examples
# Configure GigabitEthernet 0/1 to add a metric of 6 to the inbound route 1.0.0.0/8 and to add a
metric of 2 to other inbound routes.
<Sysname> system-view
[Sysname] ip ip-prefix 123 permit 1.0.0.0 8
[Sysname] route-policy abc permit node 0
[Sysname-route-policy] if-match ip-prefix 123
[Sysname-route-policy] apply cost 6
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] rip metricin route-policy abc 2
rip metricout
Use rip metricout to configure an interface to add a metric to outbound routes.
Use undo rip metricout to restore the default.
Syntax
rip metricout [ route-policy route-policy-name ] value
undo rip metricout
Default
The additional metric for outbound routes is 1.
Views
Interface view
Parameters
route-policy route-policy-name: Uses the specified routing policy to add an additional metric for the
routes matching it. The route-policy-name argument is a case-sensitive string of 1 to 63 characters.
value: Add an additional metric to outbound routes, in the range of 1 to 16.
Usage guidelines
With the command configured on an interface, the metric of RIP routes sent on the interface is increased.
If a routing policy is referenced with the route-policy keyword, the following operations can be
performed:
• Routes matching the policy are added with the metric specified in the apply cost command
configured in the policy. Routes not matching it are added with the metric specified in the rip
metricout command. The rip metricout command does not support the + or – keyword—used to
add or reduce a metric—specified in the apply cost command.
• If the apply cost command is not configured in the policy, all the outbound routes are added with
the metric specified in the rip metricout command.
Examples
# Configure GigabitEthernet 0/1 to add a metric of 6 to the outbound route 1.0.0.0/8 and to add a
metric of 2 to other outbound routes.
<Sysname> system-view
[Sysname] ip ip-prefix 123 permit 1.0.0.0 8
[Sysname] route-policy abc permit node 0
[Sysname-route-policy] if-match ip-prefix 123