F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

307
Examples
# Specifies the update, timeout, suppress, and garbage-collect timers as 5, 15, 15 and 30 seconds.
<Sysname> system-view
[Sysname] rip 100
[Sysname-rip-100] timers update 5 timeout 15 suppress 15 garbage-collect 30
validate-source-address
Use validate-source-address to enable the source IP address check on inbound RIP routing updates.
Use undo validate-source-address to disable the source IP address check.
Syntax
validate-source-address
undo validate-source-address
Default
Source IP address check on inbound RIP routing updates is enabled.
Views
RIP view
Default command level
2: System level
Usage guidelines
HP does not recommend disabling source IP address check.
Examples
# Disable the source IP address check on inbound RIP routing updates.
<Sysname> system-view
[Sysname-rip] rip 100
[Sysname-rip-100] undo validate-source-address
version
Use version to specify a global RIP version.
Use undo version to remove the configuration.
Syntax
version { 1 | 2 }
undo version
Default
If an interface has a RIP version specified, the RIP version takes effect. If it has no RIP version specified,
it can send RIPv1 broadcasts, and receive RIPv1 broadcasts and unicasts, and RIPv2 broadcasts,
multicasts, and unicasts.
Views
RIP view