F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

321
Field Descri
p
tion
Nssa Area Count NSSA area number of the current process.
7/5 translator state
State of the translator that translates Type-7 LSAs to Type-5
LSAs. The value can be one of the following:
• Enabled—Indicates that the translator is specified through
commands.
• Elected—Indicates that the translator is designated through
election.
• Disabled—Indicates that the device is not a translator that
translates Type-7 LSAs to Type-5 LSAs.
7/5 translate stability timer interval Stability interval for Type-7 LSA-to-Type-5 LSA translation.
ExChange/Loading Neighbors Neighbors in ExChange/Loading state.
Area Area ID in the IP address format.
Authtype
Authentication type of the area:
• None—No authentication.
• Simple—Simple authentication.
• MD5—MD5 authentication.
Area flag Type of the area.
SPF scheduled Count SPF calculation count in the OSPF area.
Interface Interface in the area.
Cost Interface cost.
State Interface state.
Type Interface network type.
MTU Interface MTU.
Priority Router priority.
Timers Timers: Hello, dead, poll, retransmit, and transmit delay.
display ospf cumulative
Use display ospf cumulative to display OSPF statistics.
Syntax
display ospf [ process-id ] cumulative [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
process-id: Specifies an OSPF process by its ID in the range of 1 to 65535.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.