F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

343
ip-prefix-name: Specifies an IP prefix list by its name, a string of 1 to 19 characters, to filter
inbound/outbound Type-3 LSAs. For more information about IP prefix lists, see Network Management
Configuration Guide.
export: Filters Type-3 LSAs advertised to other areas.
import: Filters Type-3 LSAs advertised into the local area.
Examples
# Use IP prefix list my-prefix-list to filter inbound Type-3 LSAs, and use ACL 2000 to filter outbound
Type-3 LSAs in OSPF Area 1.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] area 1
[Sysname-ospf-100-area-0.0.0.1] filter ip-prefix my-prefix-list import
[Sysname-ospf-100-area-0.0.0.1] filter 2000 export
filter-policy export (OSPF view)
Use filter-policy export to configure OSPF to filter redistributed routes.
Use undo filter-policy export to disable the filtering.
Syntax
filter-policy { acl-number | ip-prefix ip-prefix-name } export [ protocol [ process-id ] ]
undo filter-policy export [ protocol [ process-id ] ]
Default
Redistributed routes are not configured.
Views
OSPF view
Default command level
2: System level
Parameters
acl-number: Specifies an ACL by its number in the range of 2000 to 3999 to filter redistributed routes.
ip-prefix-name: Specifies an IP prefix list by its name, a string of 1 to 19 characters, to filter redistributed
routes.
protocol: Filters routes redistributed from the specified routing protocol, which can be direct, isis, static,
rip, ospf, or bgp. If no protocol is specified, the command filters all redistributed routes.
The following matrix shows the values for the protocol argument on different firewalls and UTM devices:
Hardware Protocols
F1000-A-EI/F1000-S-EI bgp, direct, ospf, rip, and static
F1000-E bgp, direct, ospf, rip, and static
F5000 bgp, direct, isis, ospf, rip, and static
Firewall module direct, ospf, rip, and static
U200-A bgp, direct, ospf, rip, and static