F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

359
ospf mib-binding
Use ospf mib-binding to bind an OSPF process to MIB operation for responding to SNMP requests.
Use undo ospf mib-binding to restore the default.
Syntax
ospf mib-binding process-id
undo ospf mib-binding
Default
MIB operation is bound to the OSPF process with the smallest process ID.
Views
System view
Default command level
2: System level
Parameters
process-id: Specifies an OSPF process by its ID in the range of 1 to 65535.
Examples
# Bind OSPF process 100 to MIB operation.
<Sysname> system-view
[Sysname] ospf mib-binding 100
# Restore the default, which means binding the OSPF process with the smallest process ID to MIB
operation.
<Sysname> system-view
[Sysname] undo ospf mib-binding
ospf mtu-enable
Use ospf mtu-enable to enable an interface to add the the interface MTU into DD packets.
Use undo ospf mtu-enable to restore the default.
Syntax
ospf mtu-enable
undo ospf mtu-enable
Default
The MTU in DD packets is 0.
Views
Interface view
Default command level
2: System level