F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

368
Parameters
process-id: Specifies an OSPF process by its ID in the range of 1 to 65535.
Usage guidelines
If no process ID is specified, the command restarts route redistribution for all OSPF processes.
Examples
# Restart OSPF route redistribution.
<Sysname> reset ospf redistribution
rfc1583 compatible
Use rfc1583 compatible to enable compatibility with RFC 1583.
Use undo rfc1583 compatible to disable the function.
Syntax
rfc1583 compatible
undo rfc1583 compatible
Default
Compatibility with RFC 1583 is enabled.
Views
OSPF view
Default command level
2: System level
Usage guidelines
RFC 1583 specifies a different method than RFC 2328 for selecting the best route from multiple AS
external routes destined for the same network. Using this command can make them compatible. If RFC
2328 is compatible with RFC 1583, the intra-area route in the backbone area is preferred, if not, the
intra-area route in the non-backbone area is preferred to reduce the burden of the backbone area.
Examples
# Disable compatibility with RFC 1583.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] undo rfc1583 compatible
router id
Use router id to configure a global router ID.
Use undo router id to remove the global router ID.
Syntax
router id router-id
undo router id