F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

376
IS-IS configuration commands
The term "router" in this document refers to both routers and routing-capable firewalls and UTM devices.
Feature and hardware compatibility
Hardware IS-IS com
p
atible
F1000-A-EI/F1000-S-EI No
F1000-E No
F5000 Yes
Firewall module No
U200-A No
U200-S No
area-authentication-mode
Use area-authentication-mode to specify the area authentication mode and a password.
Use undo area-authentication-mode to restore the default.
Syntax
area-authentication-mode { md5 | simple } [ cipher ] password [ ip | osi ]
undo area-authentication-mode
Default
No area authentication is configured.
Views
IS-IS view
Default command level
2: System level
Parameters
md5: Specifies the MD5 authentication mode.
simple: Specifies the simple authentication mode.
cipher: Sets a ciphertext password. If this keyword is not specified, you set a plaintext password.
password: Sets the password. This argument is case sensitive. It must be a plaintext string of 1 to 16
characters, or a ciphertext string of 33 to 53 characters.
ip: Checks IP related fields in LSPs.
osi: Checks OSI related fields in LSPs.