F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

16
Field Descri
p
tion
Loopback detection-protected The interface is shut down because a loop was detected on it.
BPDU-protected The interface is shut down by the BPDU guard function.
Monitor-Link uplink down The uplink of the monitor link group to which the interface belongs is down.
Related commands
interface
duplex
Use duplex to set the duplex mode for an Ethernet interface.
Use undo duplex to restore the default duplex mode of the Ethernet interface.
Syntax
duplex { auto | full | half }
undo duplex
Default
Ethernet interfaces operate in autonegotiation mode.
Views
Ethernet interface view
Default command level
2: System level
Parameters
auto: Sets the interface to operate in autonegotiation mode.
full: Sets the interface to operate in full duplex mode.
half: Sets the interface to operate in half duplex mode.
Examples
# Configure interface GigabitEthernet 0/1 to operate in full duplex mode.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] duplex full
flow-control
Use flow-control to enable TxRx mode generic flow control on an Ethernet interface.
Use undo flow-control to disable generic flow control on the Ethernet interface.
Syntax
flow-control
undo flow-control