F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

405
undo domain-authentication-mode
Default
No routing domain authentication is configured.
Views
IS-IS view
Default command level
2: System level
Parameters
md5: Specifies the MD5 authentication mode.
simple: Specifies the simple authentication mode.
cipher: Sets a ciphertext password. If this keyword is not specified, you set a plaintext password.
password: Set the password. This argument is case sensitive. It must be a plaintext string of 1 to 16
characters, or a ciphertext string of 33 to 53 characters.
ip: Checks IP related fields in LSPs.
osi: Checks OSI related fields in LSPs.
Usage guidelines
The configured password in the specified mode is inserted into all outgoing Level-2 packets (LSP, CSNP
and PSNP) and is used for authenticating the incoming Level-2 packets.
All the backbone routers must have the same authentication mode and password.
If neither ip nor osi is specified, the OSI related fields in LSPs are checked. Whether a password should
use ip or osi is not affected by the actual network environment.
For secrecy, all passwords, including passwords configured in plain text, are saved in cipher text.
Examples
# Specify the routing domain authentication mode as simple, and set the plaintext password to 123456 .
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] domain-authentication-mode simple 123456
Related commands
• area-authentication-mode
• isis authentication-mode
filter-policy export (IS-IS view)
Use filter-policy export to configure IS-IS to filter redistributed routes.
Use undo filter-policy export to disable IS-IS from filtering redistributed routes.
Syntax
filter-policy { acl-number | ip-prefix ip-prefix-name | route-policy route-policy-name } export [ protocol
[ process-id ] ]
undo filter-policy export [ protocol [ process-id ] ]