F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

431
Default
The maximum number of ECMP routes is 8.
Views
IS-IS view
Default command level
2: System level
Parameters
ipv4-unicast topology-name: Specifies an IPv4 unicast topology. topology-name is a case-sensitive string
of 1 to 31 characters.
number: Maximum number of ECMP routes. The value range is 1 to 8.
Usage guidelines
If no topology is specified, the command configures the maximum number of ECMP routes for the base
topology.
Examples
# Configure the maximum number of ECMP routes as 2.
<Sysname> system-view
[Sysname] isis 100
[Sysname-isis-100] maximum load-balancing 2
network-entity
Use network-entity to configure the Network Entity Title for an IS-IS routing process.
Use undo network-entity to delete a NET.
Syntax
network-entity net
undo network-entity net
Default
No NET is configured.
Views
IS-IS view
Default command level
2: System level
Parameters
net: Network Entity Title (NET) in the format of X…X.XXXX....XXXX.00 in hexadecimal notation, with the
first part X…X being the area address, the middle part XXXX....XXXX (a total of 12 "X") being the router’s
system ID, and the last part 00 being SEL.
Usage guidelines
A NET is a special NSAP address with the SEL being 0. The length of the NET is in the range of 8 bytes
to 20 bytes.
A NET comprises the following parts: