F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

438
Examples
# Set the maximum, initial, and second wait intervals to 10 seconds, 100 milliseconds and 200
milliseconds, respectively.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1]timer lsp-generation 10 100 200
timer lsp-max-age
Use timer lsp-max-age to set the LSP maximum age in the LSDB.
Use undo timer lsp-max-age to restore the default.
Syntax
timer lsp-max-age seconds
undo timer lsp-max-age
Default
The LSP maximum age is 1200 seconds.
Views
IS-IS view
Default command level
2: System level
Parameters
seconds: Specifies the LSP maximum aging time in seconds, ranging from 1 to 65535.
Examples
# Set the maximum LSP age to 1500 seconds.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] timer lsp-max-age 1500
Related commands
timer lsp-refresh
timer lsp-refresh
Use timer lsp-refresh to configure the LSP refresh interval.
Use undo timer lsp-refresh to restore the default.
Syntax
timer lsp-refresh seconds
undo timer lsp-refresh
Default
The default LSP refresh interval is 900 seconds.