F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

442
BGP configuration commands
The term "router" in this document refers to both routers and routing-capable firewalls and UTM devices.
Feature and hardware compatibility
Hardware BGP com
p
atible
F1000-A-EI/F1000-S-EI Yes
F1000-E Yes
F5000 Yes
Firewall module Yes
U200-A Yes
U200-S No
aggregate
Use aggregate to create a summary route in the BGP routing table.
Use undo aggregate to remove a summary route.
Syntax
aggregate ip-address { mask | mask-length } [ as-set | attribute-policy route-policy-name |
detail-suppressed | origin-policy route-policy-name | suppress-policy route-policy-name ] *
undo aggregate ip-address { mask | mask-length }
Default
No summary route is configured.
Views
BGP view, BGP-VPN instance view
Default command level
2: System level
Parameters
ip-address: Specifies a summary address.
mask: Specifies a summary route mask, in dotted decimal notation.
mask-length: Specifies a summary route mask length, in the range of 0 to 32.
as-set: Creates a summary with AS set.
attribute-policy route-policy-name: Sets the attributes of the summary route according to the routing
policy. The routing policy name is a case-sensitive string of 1 to 63 characters.
detail-suppressed: Advertises only the summary route.