F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100
Table Of Contents
- Title Page
- Table of Contents
- Ethernet interface configuration commands
- Bulk interface configuration commands
- IPv4 addressing configuration commands
- VLAN configuration commands
- MAC address table configuration commands
- Spanning tree configuration commands
- active region-configuration
- check region-configuration
- display stp
- display stp abnormal-port
- display stp bpdu-statistics
- display stp down-port
- display stp history
- display stp region-configuration
- display stp root
- display stp tc
- instance
- region-name
- reset stp
- revision-level
- stp bpdu-protection
- stp bridge-diameter
- stp compliance
- stp config-digest-snooping
- stp cost
- stp edged-port
- stp enable
- stp loop-protection
- stp max-hops
- stp mcheck
- stp mode
- stp no-agreement-check
- stp pathcost-standard
- stp point-to-point
- stp port priority
- stp priority
- stp region-configuration
- stp root primary
- stp root secondary
- stp root-protection
- stp tc-protection
- stp tc-protection threshold
- stp timer forward-delay
- stp timer hello
- stp timer max-age
- stp timer-factor
- stp transmit-limit
- vlan-mapping modulo
- PPP configuration commands
- PPP configuration commands
- display ppp user bind
- ip address ppp-negotiate
- ip pool
- link-protocol ppp
- ppp accm
- ppp account-statistics enable
- ppp account-statics extend remote-address
- ppp acfc local
- ppp acfc remote
- ppp authentication-mode
- ppp chap password
- ppp chap user
- ppp ipcp dns
- ppp ipcp dns admit-any
- ppp ipcp dns request
- ppp ipcp remote-address forced
- ppp pap local-user
- ppp pfc local
- ppp pfc remote
- ppp timer negotiate
- ppp user bind enable
- ppp user bind virtual-template
- remote address
- timer hold
- VT interface configuration commands
- PPP configuration commands
- PPPoE configuration commands
- Layer 2 forwarding configuration commands
- DHCP server configuration commands
- bims-server
- bootfile-name
- dhcp enable (for DHCP server)
- dhcp server apply ip-pool
- dhcp select server global-pool
- dhcp server client-detect enable
- dhcp server detect
- dhcp server forbidden-ip
- dhcp server ip-pool
- dhcp server ping packets
- dhcp server ping timeout
- dhcp server relay information enable
- dhcp server threshold
- display dhcp server conflict
- display dhcp server expired
- display dhcp server free-ip
- display dhcp server forbidden-ip
- display dhcp server ip-in-use
- display dhcp server statistics
- display dhcp server tree
- dns-list
- domain-name
- expired
- forbidden-ip
- gateway-list
- nbns-list
- netbios-type
- network
- network ip range
- network mask
- next-server
- option
- reset dhcp server conflict
- reset dhcp server ip-in-use
- reset dhcp server statistics
- static-bind client-identifier
- static-bind ip-address
- static-bind mac-address
- tftp-server domain-name
- tftp-server ip-address
- vendor-class-identifier
- DHCP relay agent configuration commands
- dhcp enable (for DHCP relay agent)
- dhcp relay address-check enable
- dhcp relay check mac-address
- dhcp relay client-detect enable
- dhcp relay information circuit-id format-type
- dhcp relay information circuit-id string
- dhcp relay information enable
- dhcp relay information format
- dhcp relay information remote-id format-type
- dhcp relay information remote-id string
- dhcp relay information strategy
- dhcp relay release ip
- dhcp relay security static
- dhcp relay security refresh enable
- dhcp relay security tracker
- dhcp relay server-detect
- dhcp relay server-group
- dhcp relay server-select
- dhcp select relay
- display dhcp relay information
- display dhcp relay security
- display dhcp relay security statistics
- display dhcp relay security tracker
- display dhcp relay server-group
- display dhcp relay statistics
- reset dhcp relay statistics
- DHCP client configuration commands
- IPv4 DNS configuration commands
- DDNS configuration commands
- ARP configuration commands
- Gratuitous ARP configuration commands
- Proxy ARP configuration commands
- Flow classification configuration commands
- QoS policy commands
- Traffic policing commands
- IP forwarding basics commands
- IP forwarding mode configuration commands
- Static routing configuration commands
- RIP configuration commands
- checkzero
- default cost (RIP view)
- default-route
- display rip
- display rip database
- display rip interface
- display rip route
- filter-policy export (RIP view)
- filter-policy import (RIP view)
- host-route
- import-route (RIP view)
- maximum load-balancing (RIP view)
- network
- output-delay
- peer
- preference
- reset rip process
- reset rip statistics
- rip
- rip authentication-mode
- rip bfd enable
- rip bfd enable destination
- rip default-route
- rip input
- rip metricin
- rip metricout
- rip mib-binding
- rip output
- rip poison-reverse
- rip split-horizon
- rip summary-address
- rip version
- silent-interface (RIP view)
- summary
- timers
- validate-source-address
- version
- OSPF configuration commands
- abr-summary (OSPF area view)
- area (OSPF view)
- asbr-summary
- authentication-mode
- bandwidth-reference (OSPF view)
- default
- default-cost (OSPF area view)
- default-route-advertise (OSPF view)
- description (OSPF/OSPF area view)
- display ospf abr-asbr
- display ospf asbr-summary
- display ospf brief
- display ospf cumulative
- display ospf error
- display ospf interface
- display ospf lsdb
- display ospf nexthop
- display ospf peer
- display ospf peer statistics
- display ospf request-queue
- display ospf retrans-queue
- display ospf routing
- display ospf vlink
- display router id
- enable link-local-signaling
- enable log
- enable out-of-band-resynchronization
- filter
- filter-policy export (OSPF view)
- filter-policy import (OSPF view)
- host-advertise
- import-route (OSPF view)
- ispf enable
- log-peer-change
- lsa-arrival-interval
- lsa-generation-interval
- lsdb-overflow-limit
- maximum load-balancing (OSPF view)
- network (OSPF area view)
- nssa
- opaque-capability enable
- ospf
- ospf authentication-mode
- ospf bfd enable
- ospf cost
- ospf dr-priority
- ospf mib-binding
- ospf mtu-enable
- ospf network-type
- ospf packet-process prioritized-treatment
- ospf timer dead
- ospf timer hello
- ospf timer poll
- ospf timer retransmit
- ospf trans-delay
- peer
- preference
- reset ospf counters
- reset ospf process
- reset ospf redistribution
- rfc1583 compatible
- router id
- silent-interface (OSPF view)
- snmp-agent trap enable ospf
- spf-schedule-interval
- stub (OSPF area view)
- stub-router
- transmit-pacing
- vlink-peer (OSPF area view)
- IS-IS configuration commands
- Feature and hardware compatibility
- area-authentication-mode
- auto-cost enable
- bandwidth-reference (IS-IS view)
- circuit-cost
- cost-style
- default-route-advertise (IS-IS view)
- display isis brief
- display isis debug-switches
- display isis graceful-restart status
- display isis interface
- display isis lsdb
- display isis mesh-group
- display isis name-table
- display isis peer
- display isis route
- display isis spf-log
- display isis statistics
- domain-authentication-mode
- filter-policy export (IS-IS view)
- filter-policy import (IS-IS view)
- flash-flood
- import-route (IS-IS view)
- import-route isis level-2 into level-1
- import-route limit (IS-IS view)
- isis
- isis authentication-mode
- isis circuit-level
- isis circuit-type p2p
- isis cost
- isis dis-name
- isis dis-priority
- isis enable
- isis mesh-group
- isis mib-binding
- isis peer-ip-ignore
- isis silent
- isis small-hello
- isis timer csnp
- isis timer hello
- isis timer holding-multiplier
- isis timer lsp
- isis timer retransmit
- is-level
- is-name
- is-name map
- is-snmp-traps enable
- log-peer-change (IS-IS view)
- lsp-fragments-extend
- lsp-length originate
- lsp-length receive
- maximum load-balancing (IS-IS view)
- network-entity
- preference (IS-IS view)
- priority high
- reset isis all
- reset isis peer
- set-overload
- summary (IS-IS view)
- timer lsp-generation
- timer lsp-max-age
- timer lsp-refresh
- timer spf
- virtual-system
- Feature and hardware compatibility
- BGP configuration commands
- Feature and hardware compatibility
- aggregate
- balance (BGP/BGP-VPN instance view)
- bestroute as-path-neglect (BGP/BGP-VPN instance view)
- bestroute compare-med (BGP/BGP-VPN instance view)
- bestroute med-confederation (BGP/BGP-VPN instance view)
- bgp
- compare-different-as-med (BGP/BGP-VPN instance view)
- confederation id
- confederation nonstandard
- confederation peer-as
- dampening (BGP/BGP-VPN instance view)
- default ipv4-unicast
- default local-preference (BGP/BGP-VPN instance view)
- default med (BGP/BGP-VPN instance view)
- default-route imported (BGP/BGP-VPN instance view)
- display bgp group
- display bgp network
- display bgp paths
- display bgp peer
- display bgp peer received ip-prefix
- display bgp routing-table
- display bgp routing-table as-path-acl
- display bgp routing-table cidr
- display bgp routing-table community
- display bgp routing-table community-list
- display bgp routing-table dampened
- display bgp routing-table dampening parameter
- display bgp routing-table different-origin-as
- display bgp routing-table flap-info
- display bgp routing-table label
- display bgp routing-table peer
- display bgp routing-table regular-expression
- display bgp routing-table statistic
- display router id
- ebgp-interface-sensitive
- filter-policy export (BGP/BGP-VPN instance view)
- filter-policy import (BGP/BGP-VPN instance view)
- group (BGP/BGP-VPN instance view)
- ignore-first-as
- import-route (BGP/BGP-VPN instance view)
- ipv4-family vpn-instance
- log-peer-change
- network (BGP/BGP-VPN instance view)
- network short-cut (BGP/BGP-VPN instance view)
- peer advertise-community (BGP/BGP-VPN instance view)
- peer advertise-ext-community (BGP/BGP-VPN instance view)
- peer allow-as-loop (BGP/BGP-VPN instance view)
- peer as-number (BGP/BGP-VPN instance view)
- peer as-path-acl (BGP/BGP-VPN instance view)
- peer bfd
- peer capability-advertise conventional
- peer capability-advertise orf
- peer capability-advertise orf non-standard
- peer capability-advertise route-refresh
- peer capability-advertise suppress-4-byte-as
- peer connect-interface (BGP/BGP-VPN instance view)
- peer default-route-advertise (BGP/BGP-VPN instance view)
- peer description (BGP/BGP-VPN instance view)
- peer ebgp-max-hop (BGP/BGP-VPN instance view)
- peer enable (BGP/BGP-VPN instance view)
- peer fake-as (BGP/BGP-VPN instance view)
- peer filter-policy (BGP/BGP-VPN instance view)
- peer group (BGP/BGP-VPN instance view)
- peer ignore (BGP/BGP-VPN instance view)
- peer ip-prefix
- peer keep-all-routes (BGP/BGP-VPN instance view)
- peer log-change (BGP/BGP-VPN instance view)
- peer next-hop-local (BGP/BGP-VPN instance view)
- peer password
- peer preferred-value (BGP/BGP-VPN instance view)
- peer public-as-only (BGP/BGP-VPN instance view)
- peer reflect-client (BGP/BGP-VPN instance view)
- peer route-limit (BGP/BGP-VPN instance view)
- peer route-policy (BGP/BGP-VPN instance view)
- peer route-update-interval (BGP/BGP-VPN instance view)
- peer substitute-as (BGP/BGP-VPN instance view)
- peer timer (BGP/BGP-VPN instance view)
- preference (BGP/BGP-VPN instance view)
- reflect between-clients (BGP view/BGP-VPN instance view)
- reflector cluster-id (BGP view/BGP-VPN instance view)
- refresh bgp
- reset bgp
- reset bgp dampening
- reset bgp flap-info
- reset bgp ipv4 all
- router id
- router-id
- summary automatic
- synchronization (BGP view)
- timer (BGP/BGP-VPN instance view)
- Feature and hardware compatibility
- Basic IP routing configuration commands
- Policy-based routing configuration commands
- apply default output-interface
- apply ip-address default next-hop
- apply ip-address next-hop
- apply ip-precedence
- apply output-interface
- apply output-interface ip-address next-hop dhcpc
- display ip policy-based-route
- display ip policy-based-route setup
- display ip policy-based-route statistics
- display policy-based-route
- if-match acl
- if-match packet-length
- ip local policy-based-route
- ip policy-based-route
- policy-based-route
- reset policy-based-route statistics
- Multicast routing and forwarding configuration commands
- delete ip rpf-route-static
- display multicast boundary
- display multicast forwarding-table
- display multicast routing-table
- display multicast routing-table static
- display multicast rpf-info
- ip rpf-route-static
- mtracert
- multicast boundary
- multicast forwarding-table downstream-limit
- multicast forwarding-table route-limit
- multicast load-splitting
- multicast longest-match
- multicast routing-enable
- reset multicast forwarding-table
- reset multicast routing-table
- IGMP configuration commands
- display igmp group
- display igmp host interface
- display igmp interface
- display igmp proxying group
- display igmp routing-table
- display igmp ssm-mapping
- display igmp ssm-mapping group
- display igmp ssm-mapping host interface
- fast-leave (IGMP view)
- host-tracking (IGMP view)
- igmp
- igmp enable
- igmp fast-leave
- igmp group-limit
- igmp group-policy
- igmp host-tracking
- igmp last-member-query-interval
- igmp max-response-time
- igmp proxying enable
- igmp proxying forwarding
- igmp require-router-alert
- igmp robust-count
- igmp send-router-alert
- igmp ssm-mapping enable
- igmp startup-query-count
- igmp startup-query-interval
- igmp static-group
- igmp timer other-querier-present
- igmp timer query
- igmp version
- last-member-query-interval (IGMP view)
- max-response-time (IGMP view)
- require-router-alert (IGMP view)
- reset igmp group
- reset igmp ssm-mapping group
- robust-count (IGMP view)
- send-router-alert (IGMP view)
- ssm-mapping (IGMP view)
- startup-query-count (IGMP view)
- startup-query-interval (IGMP view)
- timer other-querier-present (IGMP view)
- timer query (IGMP view)
- version (IGMP view)
- PIM configuration commands
- auto-rp enable
- bsm-fragment enable (PIM view)
- bsr-policy (PIM view)
- c-bsr (PIM view)
- c-bsr admin-scope (PIM view)
- c-bsr global
- c-bsr group
- c-bsr hash-length (PIM view)
- c-bsr holdtime (PIM view)
- c-bsr interval (PIM view)
- c-bsr priority (PIM view)
- c-rp (PIM view)
- c-rp advertisement-interval (PIM view)
- c-rp holdtime (PIM view)
- crp-policy (PIM view)
- display pim bsr-info
- display pim claimed-route
- display pim control-message counters
- display pim grafts
- display pim interface
- display pim join-prune
- display pim neighbor
- display pim routing-table
- display pim rp-info
- hello-option dr-priority (PIM view)
- hello-option holdtime (PIM view)
- hello-option lan-delay (PIM view)
- hello-option neighbor-tracking (PIM view)
- hello-option override-interval (PIM view)
- holdtime assert (PIM view)
- holdtime join-prune (PIM view)
- jp-pkt-size (PIM view)
- jp-queue-size (PIM view)
- pim
- pim bsr-boundary
- pim dm
- pim hello-option dr-priority
- pim hello-option holdtime
- pim hello-option lan-delay
- pim hello-option neighbor-tracking
- pim hello-option override-interval
- pim holdtime assert
- pim holdtime join-prune
- pim neighbor-policy
- pim require-genid
- pim sm
- pim state-refresh-capable
- pim timer graft-retry
- pim timer hello
- pim timer join-prune
- pim triggered-hello-delay
- probe-interval (PIM view)
- prune delay (PIM view)
- register-policy (PIM view)
- register-suppression-timeout (PIM view)
- register-whole-checksum (PIM view)
- reset pim control-message counters
- source-lifetime (PIM view)
- source-policy (PIM view)
- spt-switch-threshold (PIM view)
- ssm-policy (PIM view)
- state-refresh-interval (PIM view)
- state-refresh-rate-limit (PIM view)
- state-refresh-ttl
- static-rp (PIM view)
- timer hello (PIM view)
- timer join-prune (PIM view)
- MSDP configuration commands
- cache-sa-enable
- display msdp brief
- display msdp peer-status
- display msdp sa-cache
- display msdp sa-count
- encap-data-enable
- import-source
- msdp
- originating-rp
- peer connect-interface
- peer description
- peer mesh-group
- peer minimum-ttl
- peer password
- peer request-sa-enable
- peer sa-cache-maximum
- peer sa-policy
- peer sa-request-policy
- reset msdp peer
- reset msdp sa-cache
- reset msdp statistics
- shutdown (MSDP view)
- static-rpf-peer
- timer retry
- IPv6 basics configuration commands
- display ipv6 fib
- display ipv6 fib ipv6-address
- display ipv6 interface
- display ipv6 neighbors
- display ipv6 neighbors count
- display ipv6 neighbors vpn-instance
- display ipv6 pathmtu
- display ipv6 prefix
- display ipv6 socket
- display ipv6 statistics
- display tcp ipv6 statistics
- display tcp ipv6 status
- display udp ipv6 statistics
- ipv6
- ipv6 address
- ipv6 address prefix-number
- ipv6 address anycast
- ipv6 address auto
- ipv6 address auto link-local
- ipv6 address eui-64
- ipv6 address link-local
- ipv6 fib-loadbalance-type hash-based
- ipv6 hoplimit-expires enable
- ipv6 icmp-error
- ipv6 icmpv6 multicast-echo-reply enable
- ipv6 mtu
- ipv6 nd autoconfig managed-address-flag
- ipv6 nd autoconfig other-flag
- ipv6 nd dad attempts
- ipv6 nd hop-limit
- ipv6 nd ns retrans-timer
- ipv6 nd nud reachable-time
- ipv6 nd ra halt
- ipv6 nd ra interval
- ipv6 nd ra no-advlinkmtu
- ipv6 nd ra prefix
- ipv6 nd ra router-lifetime
- ipv6 neighbor
- ipv6 neighbor stale-aging
- ipv6 neighbors max-learning-num
- ipv6 pathmtu
- ipv6 pathmtu age
- ipv6 prefix
- ipv6 redirects enable
- ipv6 unreachables enable
- local-proxy-nd enable
- proxy-nd enable
- reset ipv6 neighbors
- reset ipv6 pathmtu
- reset ipv6 statistics
- reset tcp ipv6 statistics
- reset udp ipv6 statistics
- tcp ipv6 timer fin-timeout
- tcp ipv6 timer syn-timeout
- tcp ipv6 window
- DHCPv6 configuration commands
- DHCPv6 common configuration commands
- DHCPv6 server configuration commands
- address range
- display ipv6 dhcp pool
- display ipv6 dhcp prefix-pool
- display ipv6 dhcp server
- display ipv6 dhcp server conflict
- display ipv6 dhcp server expired
- display ipv6 dhcp server ip-in-use
- display ipv6 dhcp server pd-in-use
- display ipv6 dhcp server statistics
- dns-server
- domain-name
- ds-lite address
- network
- ipv6 dhcp option-group
- ipv6 dhcp pool
- ipv6 dhcp prefix-pool
- ipv6 dhcp server
- ipv6 dhcp server enable
- option
- option-group
- prefix-pool
- reset ipv6 dhcp server conflict
- reset ipv6 dhcp server expired
- reset ipv6 dhcp server ip-in-use
- reset ipv6 dhcp server pd-in-use
- reset ipv6 dhcp server statistics
- sip-server
- static-bind address
- static-bind prefix
- temporary address range
- DHCPv6 relay agent configuration commands
- DHCPv6 client configuration commands
- IPv6 DNS configuration commands
- IPv6 static routing configuration commands
- RIPng configuration commands
- Feature and hardware compatibility
- checkzero
- default cost (RIPng view)
- display ripng
- display ripng database
- display ripng interface
- display ripng route
- enable ipsec-policy (RIPng view)
- filter-policy export (RIPng view)
- filter-policy import (RIPng view)
- import-route
- maximum load-balancing (RIPng view)
- preference
- reset ripng process
- reset ripng statistics
- ripng
- ripng default-route
- ripng enable
- ripng ipsec-policy
- ripng metricin
- ripng metricout
- ripng poison-reverse
- ripng split-horizon
- ripng summary-address
- timers
- Feature and hardware compatibility
- OSPFv3 configuration commands
- Feature and hardware compatibility
- abr-summary (OSPFv3 area view)
- area (OSPFv3 view)
- bandwidth-reference
- default cost
- default-cost (OSPFv3 area view)
- default-route-advertise
- display ospfv3
- display ospfv3 interface
- display ospfv3 lsdb
- display ospfv3 lsdb statistics
- display ospfv3 next-hop
- display ospfv3 peer
- display ospfv3 peer statistic
- display ospfv3 request-list
- display ospfv3 retrans-list
- display ospfv3 routing
- display ospfv3 statistics
- display ospfv3 topology
- display ospfv3 vlink
- enable ipsec-policy (OSPFv3 area view)
- filter-policy export (OSPFv3 view)
- filter-policy import (OSPFv3 view)
- import-route (OSPFv3 view)
- log-peer-change
- maximum load-balancing (OSPFv3 view)
- ospfv3
- ospfv3 area
- ospfv3 bfd enable
- ospfv3 cost
- ospfv3 dr-priority
- ospfv3 ipsec-policy
- ospfv3 mtu-ignore
- ospfv3 network-type
- ospfv3 peer
- ospfv3 timer dead
- ospfv3 timer hello
- ospfv3 timer retransmit
- ospfv3 timer poll
- ospfv3 trans-delay
- preference
- router-id
- silent-interface(OSPFv3 view)
- spf timers
- stub (OSPFv3 area view)
- vlink-peer (OSPFv3 area view)
- Feature and hardware compatibility
- IPv6 IS-IS configuration commands
- IPv6 BGP configuration commands
- Feature and hardware compatibility
- aggregate (IPv6 address family view)
- balance (IPv6 address family view/IPv6 BGP-VPN instance view)
- bestroute as-path-neglect (IPv6 address family view)
- bestroute compare-med (IPv6 address family view)
- bestroute med-confederation (IPv6 address family view)
- compare-different-as-med (IPv6 address family view)
- dampening (IPv6 address family view)
- default local-preference (IPv6 address family view/IPv6 BGP-VPN instance view)
- default med (IPv6 address family view/IPv6 BGP-VPN instance view)
- default-route imported (IPv6 address family view/IPv6 BGP-VPN instance view)
- display bgp ipv6 group
- display bgp ipv6 network
- display bgp ipv6 paths
- display bgp ipv6 peer
- display bgp ipv6 peer received ipv6-prefix
- display bgp ipv6 routing-table
- display bgp ipv6 routing-table as-path-acl
- display bgp ipv6 routing-table community
- display bgp ipv6 routing-table community-list
- display bgp ipv6 routing-table dampened
- display bgp ipv6 routing-table dampening parameter
- display bgp ipv6 routing-table different-origin-as
- display bgp ipv6 routing-table flap-info
- display bgp ipv6 routing-table label
- display bgp ipv6 routing-table peer
- display bgp ipv6 routing-table regular-expression
- display bgp ipv6 routing-table statistic
- filter-policy export (IPv6 address family view/IPv6 BGP-VPN instance view)
- filter-policy import (IPv6 address family view/IPv6 BGP-VPN instance view)
- group (IPv6 address family view)
- import-route (IPv6 address family view/IPv6 BGP-VPN instance view)
- ipv6-family
- network (IPv6 address family view/IPv6 BGP-VPN instance view)
- peer advertise-community (IPv6 address family view)
- peer advertise-ext-community (IPv6 address family view)
- peer allow-as-loop (IPv6 address family view)
- peer as-number (IPv6 address family view)
- peer as-number (IPv6 BGP-VPN instance view)
- peer as-path-acl (IPv6 address family view)
- peer bfd (IPv6 address family view/IPv6 BGP-VPN instance view)
- peer capability-advertise orf
- peer capability-advertise orf non-standard (IPv6 address family view)
- peer capability-advertise route-refresh
- peer capability-advertise suppress-4-byte-as (IPv6 address family view)
- peer capability-advertise suppress-4-byte-as (IPv6 BGP-VPN instance view)
- peer connect-interface (IPv6 address family view)
- peer default-route-advertise
- peer description (IPv6 address family view)
- peer ebgp-max-hop (IPv6 address family view)
- peer enable (IPv6 address family view)
- peer fake-as (IPv6 address family view)
- peer filter-policy (IPv6 address family view)
- peer group (IPv6 address family view)
- peer ignore (IPv6 address family view)
- peer ipv6-prefix
- peer ipsec-policy (IPv6 address family view)
- peer keep-all-routes (IPv6 address family view)
- peer label-route-capability (IPv6 address family view)
- peer log-change (IPv6 address family view)
- peer next-hop-local (IPv6 address family view)
- peer password
- peer preferred-value (IPv6 address family view)
- peer preferred-value (IPv6 BGP-VPN instance view)
- peer public-as-only (IPv6 address family view)
- peer reflect-client (IPv6 address family view)
- peer route-limit (IPv6 address family view)
- peer route-policy (IPv6 address family view)
- peer route-policy (IPv6 BGP-VPN instance view)
- peer route-update-interval (IPv6 address family view)
- peer substitute-as (IPv6 address family view)
- peer timer (IPv6 address family view)
- preference (IPv6 address family view/IPv6 BGP-VPN instance view)
- reflect between-clients (IPv6 address family view)
- reflector cluster-id (IPv6 address family view)
- refresh bgp ipv6
- reset bgp ipv6
- reset bgp ipv6 dampening
- reset bgp ipv6 flap-info
- router-id
- synchronization (IPv6 address family view)
- timer (IPv6 address family view)
- Feature and hardware compatibility
- IPv6 routing table displaying commands
- IPv6 policy-based routing configuration commands
- Feature and hardware compatibility
- apply default output-interface
- apply ipv6-address default next-hop
- apply ipv6-address next-hop
- apply ipv6-precedence
- apply output-interface
- display ipv6 config policy-based-route
- display ipv6 policy-based-route
- display ipv6 policy-based-route setup
- display ipv6 policy-based-route statistics
- if-match acl6
- if-match packet-length
- ipv6 local policy-based-route
- ipv6 policy-based-route (interface view)
- ipv6 policy-based-route (system view)
- reset ipv6 policy-based-route statistics
- Feature and hardware compatibility
- IPv6 multicast routing and forwarding configuration commands
- display multicast ipv6 boundary
- display multicast ipv6 forwarding-table
- display multicast ipv6 routing-table
- display multicast ipv6 rpf-info
- multicast ipv6 boundary
- multicast ipv6 forwarding-table downstream-limit
- multicast ipv6 forwarding-table route-limit
- multicast ipv6 load-splitting
- multicast ipv6 longest-match
- multicast ipv6 routing-enable
- reset multicast ipv6 forwarding-table
- reset multicast ipv6 routing-table
- IPv6 PIM configuration commands
- bsm-fragment enable (IPv6 PIM view)
- bsr-policy (IPv6 PIM view)
- c-bsr (IPv6 PIM view)
- c-bsr admin-scope (IPv6 PIM view)
- c-bsr hash-length (IPv6 PIM view)
- c-bsr holdtime (IPv6 PIM view)
- c-bsr interval (IPv6 PIM view)
- c-bsr priority (IPv6 PIM view)
- c-bsr scope
- c-rp (IPv6 PIM view)
- c-rp advertisement-interval (IPv6 PIM view)
- c-rp holdtime (IPv6 PIM view)
- crp-policy (IPv6 PIM view)
- display pim ipv6 bsr-info
- display pim ipv6 claimed-route
- display pim ipv6 control-message counters
- display pim ipv6 grafts
- display pim ipv6 interface
- display pim ipv6 join-prune
- display pim ipv6 neighbor
- display pim ipv6 routing-table
- display pim ipv6 rp-info
- embedded-rp
- hello-option dr-priority (IPv6 PIM view)
- hello-option holdtime (IPv6 PIM view)
- hello-option lan-delay (IPv6 PIM view)
- hello-option neighbor-tracking (IPv6 PIM view)
- hello-option override-interval (IPv6 PIM view)
- holdtime assert (IPv6 PIM view)
- holdtime join-prune (IPv6 PIM view)
- jp-pkt-size (IPv6 PIM view)
- jp-queue-size (IPv6 PIM view)
- pim ipv6
- pim ipv6 bsr-boundary
- pim ipv6 dm
- pim ipv6 hello-option dr-priority
- pim ipv6 hello-option holdtime
- pim ipv6 hello-option lan-delay
- pim ipv6 hello-option neighbor-tracking
- pim ipv6 hello-option override-interval
- pim ipv6 holdtime assert
- pim ipv6 holdtime join-prune
- pim ipv6 neighbor-policy
- pim ipv6 require-genid
- pim ipv6 sm
- pim ipv6 state-refresh-capable
- pim ipv6 timer graft-retry
- pim ipv6 timer hello
- pim ipv6 timer join-prune
- pim ipv6 triggered-hello-delay
- probe-interval (IPv6 PIM view)
- prune delay (IPv6 PIM view)
- register-policy (IPv6 PIM view)
- register-suppression-timeout (IPv6 PIM view)
- register-whole-checksum (IPv6 PIM view)
- reset pim ipv6 control-message counters
- source-lifetime (IPv6 PIM view)
- source-policy (IPv6 PIM view)
- spt-switch-threshold (IPv6 PIM view)
- ssm-policy (IPv6 PIM view)
- state-refresh-hoplimit
- state-refresh-interval (IPv6 PIM view)
- state-refresh-rate-limit (IPv6 PIM view)
- static-rp (IPv6 PIM view)
- timer hello (IPv6 PIM view)
- timer join-prune (IPv6 PIM view)
- MLD configuration commands
- display mld group
- display mld host interface
- display mld interface
- display mld proxying group
- display mld routing-table
- display mld ssm-mapping
- display mld ssm-mapping group
- display mld ssm-mapping host interface
- fast-leave (MLD view)
- host-tracking (MLD view)
- last-listener-query-interval (MLD view)
- max-response-time (MLD view)
- mld
- mld enable
- mld fast-leave
- mld group-limit
- mld group-policy
- mld host-tracking
- mld last-listener-query-interval
- mld max-response-time
- mld proxying enable
- mld proxying forwarding
- mld require-router-alert
- mld robust-count
- mld send-router-alert
- mld ssm-mapping enable
- mld startup-query-count
- mld startup-query-interval
- mld static-group
- mld timer other-querier-present
- mld timer query
- mld version
- require-router-alert (MLD view)
- reset mld group
- reset mld ssm-mapping group
- robust-count (MLD view)
- send-router-alert (MLD view)
- ssm-mapping (MLD view)
- startup-query-count (MLD view)
- startup-query-interval (MLD view)
- timer other-querier-present (MLD view)
- timer query (MLD view)
- version (MLD view)
- Routing policy configuration commands
- Common routing policy configuration commands
- apply as-path
- apply comm-list delete
- apply community
- apply cost
- apply cost-type
- apply extcommunity
- apply isis
- apply ip-precedence
- apply local-preference
- apply origin
- apply preference
- apply preferred-value
- apply tag
- continue
- display ip as-path
- display ip community-list
- display ip extcommunity-list
- display route-policy
- if-match as-path
- if-match community
- if-match cost
- if-match extcommunity
- if-match interface
- if-match route-type
- if-match tag
- ip as-path
- ip community-list
- ip extcommunity-list
- route-policy
- IPv4 routing policy configuration commands
- IPv6 routing policy configuration commands
- Common routing policy configuration commands
- SSL configuration commands
- Support and other resources
- Index
446
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpn-instance vpn1
[Sysname-bgp-ipv4-vpn1] bestroute as-path-neglect
bestroute compare-med (BGP/BGP-VPN instance view)
Use bestroute compare-med to enable the comparison of MEDs for routes on a per-AS basis.
Use undo bestroute compare-med to disable this comparison.
Syntax
bestroute compare-med
undo bestroute compare-med
Default
This comparison is not enabled.
Views
BGP view, BGP-VPN instance view
Default command level
2: System level
Examples
# In BGP view, enable the comparison of MEDs for routes on a per-AS basis when selecting the best
route.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] bestroute compare-med
# In BGP-VPN instance view, enable the comparison of MEDs for routes on a per-AS basis when selecting
the best route. (The VPN has been created.)
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpn-instance vpn1
[Sysname-bgp-ipv4-vpn1] bestroute compare-med
bestroute med-confederation (BGP/BGP-VPN instance view)
Use bestroute med-confederation to enable the comparison of the MED for paths from confederation
peers during best route selection.
Use undo bestroute med-confederation to disable the comparison.
Syntax
bestroute med-confederation
undo bestroute med-confederation
Default
The comparison is not enabled.
Views
BGP view, BGP-VPN instance view