F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

480
ignore-first-as
Use ignore-first-as to configure BGP to ignore the first AS number of EBGP route updates.
Use undo ignore-first-as to configure BGP to check the first AS number of EBGP route updates.
Syntax
ignore-first-as
undo ignore-first-as
Default
BGP checks the first AS number of a received EBGP route update. If the first AS number is not that of the
BGP peer, the BGP router discards the route update.
Views
BGP view
Examples
# Configure BGP to ignore the first AS number of EBGP route updates.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ignore-first-as
import-route (BGP/BGP-VPN instance view)
Use import-route to configure BGP to redistribute routes from the specified IGP protocol.
Use undo import-route to disable route redistribution from a routing protocol.
Syntax
import-route protocol [ { process-id | all-processes } [ allow-direct | med med-value | route-policy
route-policy-name ] * ]
undo import-route protocol [ process-id | all-processes ]
Default
BGP does not redistribute routes from other protocols.
Views
BGP view, BGP-VPN instance view
Default command level
2: System level
Parameters
protocol: Redistributes routes from the specified routing protocol, which can be direct, isis, ospf, rip, or
static.
The following matrix shows the values for the protocol argument on different firewalls and UTM devices:
Hardware Protocols
F1000-A-EI/F1000-S-EI direct, ospf, rip, and static
F1000-E direct, ospf, rip, and static