F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

495
Examples
# In BGP view, specify loopback 0 as the source interface for routing updates to the peer group test.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] peer test connect-interface loopback 0
# In BGP-VPN instance view, specify loopback 0 as the source interface for routing updates to the peer
group test. (The VPN has been created.)
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpn-instance vpn1
[Sysname-bgp-ipv4-vpn1] peer test connect-interface loopback 0
peer default-route-advertise (BGP/BGP-VPN instance view)
Use peer default-route-advertise to advertise a default route to a peer/peer group.
Use undo peer default-route-advertise to disable default route advertisement to a peer/peer group.
Syntax
peer { group-name | ip-address } default-route-advertise [ route-policy route-policy-name ]
undo peer { group-name | ip-address } default-route-advertise
Default
No default route is advertised to a peer/peer group.
Views
BGP view, BGP-VPN instance view
Default command level
2: System level
Parameters
group-name: Specifies the name of a peer group, a string of 1 to 47 characters.
ip-address: Specifies the IP address of a peer.
route-policy-name: Specifies the routing policy name, a case-sensitive string of 1 to 63 characters.
Usage guidelines
With this command used, the router unconditionally sends a default route with the next hop being itself
to the peer/peer group regardless of whether the default route is available in the routing table.
Examples
# In BGP view, advertise a default route to peer group test.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] peer test default-route-advertise
# In BGP-VPN instance view, advertise a default route to peer group test. (The VPN has been created.)
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpn-instance vpn1