F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

501
Default
Session establishment with a peer or peer group is allowed.
Views
BGP view, BGP-VPN instance view
Default command level
2: System level
Parameters
group-name: Specifies the name of a peer group, a string of 1 to 47 characters.
ip-address: Specifies the IP address of a peer.
Usage guidelines
After the peer ignore command is executed, the system disables the session with the specified peer or
peer group and clears all the related routing information. For a peer group, all sessions with the peer
group is terminated.
Examples
# In BGP view, disable session establishment with peer 10.10.10.10.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] peer 10.10.10.10 ignore
# In BGP-VPN instance view, disable session establishment with peer 10.10.10.10. (The VPN has been
created.)
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpn-instance vpn1
[Sysname-bgp-ipv4-vpn1] peer 10.10.10.10 ignore
peer ip-prefix
Use peer ip-prefix to reference an IP prefix list to filter routes received from or advertised to a peer or peer
group.
Use undo peer ip-prefix to remove the configuration.
Syntax
peer { group-name | ip-address } ip-prefix ip-prefix-name { export | import }
undo peer { group-name | ip-address } ip-prefix { export | import }
Default
No IP prefix list based filtering is configured.
Views
BGP view, BGP-VPN instance view
Default command level
2: System level