F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

507
Parameters
group-name: Specifies the name of a peer group, a string of 1 to 47 characters.
ip-address: Specifies the IP address of a peer.
Usage guidelines
The command does not take effect if the BGP update has both public and private AS numbers. The range
of private AS number is from 64512 to 65535.
Examples
# In BGP view, carry no private AS number in BGP updates sent to the peer group test.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] peer test public-as-only
# In BGP-VPN instance view, carry no private AS number in BGP updates sent to the peer group test. (The
VPN has been created.)
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpn-instance vpn1
[Sysname-bgp-ipv4-vpn1] peer test public-as-only
peer reflect-client (BGP/BGP-VPN instance view)
Use peer reflect-client to configure the router as a route reflector and specify a peer/peer group as a
client.
Use undo peer reflect-client to remove the configuration.
Syntax
peer { group-name | ip-address } reflect-client
undo peer { group-name | ip-address } reflect-client
Default
Neither the route reflector nor the client is configured.
Views
BGP view, BGP-VPN instance view
Default command level
2: System level
Parameters
group-name: Name of a peer group, a string of 1 to 47 characters.
ip-address: IP address of a peer.
Examples
# In BGP view, configure the local device as a route reflector and specify the IBGP peer group test as a
client.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] peer test reflect-client