F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

583
Examples
# Enable the IGMP host tracking function globally on the public network.
<Sysname> system-view
[Sysname] igmp
[Sysname-igmp] host-tracking
igmp
Use igmp to enter public network IGMP view.
Use undo igmp to remove configurations in public network IGMP view.
Syntax
igmp
undo igmp
Views
System view
Default command level
2: System level
Usage guidelines
IP multicast routing must be enabled before this command can take effect.
Examples
# Enable IP multicast routing on the public network and enter public network IGMP view.
<Sysname> system-view
[Sysname] multicast routing-enable
[Sysname] igmp
[Sysname-igmp]
Related commands
• igmp enable
• multicast routing-enable
igmp enable
Use igmp enable to enable IGMP on the current interface.
Use undo igmp enable to disable IGMP on the current interface.
Syntax
igmp enable
undo igmp enable
Default
IGMP is disabled on all interfaces.
Views
Interface view