F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

597
Syntax
last-member-query-interval interval
undo last-member-query-interval
Default
The IGMP last-member query interval is 1 second.
Views
Public network IGMP view
Default command level
2: System level
Parameters
interval: Last-member query interval in seconds, in the range of 1 to 5.
Examples
# Set the global IGMP last-member interval to 3 seconds on the public network.
<Sysname> system-view
[Sysname] igmp
[Sysname-igmp] last-member-query-interval 3
Related commands
• display igmp interface
• igmp last-member-query-interval
• robust-count
max-response-time (IGMP view)
Use max-response-time to configure the maximum response time for IGMP general queries globally.
Use undo max-response-time to restore the default.
Syntax
max-response-time interval
undo max-response-time
Default
The maximum response time for IGMP general queries is 10 seconds.
Views
Public network IGMP view
Default command level
2: System level
Parameters
interval: Specifies the maximum response time for IGMP general queries in seconds, in the range of 1 to
25.
Examples
# Set the maximum response time for IGMP general queries to 8 seconds globally on the public network.