F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

636
Syntax
holdtime assert interval
undo holdtime assert
Default
The assert timeout timer is 180 seconds.
Views
Public network PIM view
Default command level
2: System level
Parameters
interval: Specifies an assert timeout timer in seconds. The value ranges from 7 to 2147483647.
Usage guidelines
This command is effective for both PIM-DM and PIM-SM.
Examples
# Set the global value of the assert timeout timer to 100 seconds on the public network.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] holdtime assert 100
Related commands
• holdtime join-prune
• pim holdtime assert
• pim holdtime join-prune
holdtime join-prune (PIM view)
Use holdtime join-prune to configure the global value of the join/prune timeout timer.
Use undo holdtime join-prune to restore the default.
Syntax
holdtime join-prune interval
undo holdtime join-prune
Default
The join/prune timeout timer is 210 seconds.
Views
Public network PIM view
Default command level
2: System level
Parameters
interval: Specifies a join/prune timeout timer in seconds. The value ranges from 1 to 65535.