F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

637
Examples
# Set the global value of the join/prune timeout timer to 280 seconds on the public network.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] holdtime join-prune 280
Related commands
• holdtime assert
• pim holdtime assert
• pim holdtime join-prune
jp-pkt-size (PIM view)
Use jp-pkt-size to configure the maximum size of each join/prune message.
Use undo jp-pkt-size to restore the default.
Syntax
jp-pkt-size packet-size
undo jp-pkt-size
Default
The maximum size of each join/prune message is 8100 bytes.
Views
Public network PIM view
Default command level
2: System level
Parameters
packet-size: Specifies the maximum size of each join/prune message in bytes. The value ranges from
100 to 8100.
Examples
# Set the maximum size of each join/prune message to 1500 bytes on the public network.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] jp-pkt-size 1500
Related commands
jp-queue-size
jp-queue-size (PIM view)
Use jp-queue-size to configure the maximum number of (S, G) entries in each join/prune message.
Use undo jp-queue-size to restore the default.
Syntax
jp-queue-size queue-size