F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

641
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] pim hello-option dr-priority 3
Related commands
hello-option dr-priority
pim hello-option holdtime
Use pim hello-option holdtime to configure the PIM neighbor timeout timer on the current interface.
Use undo pim hello-option holdtime to restore the default.
Syntax
pim hello-option holdtime interval
undo pim hello-option holdtime
Default
The PIM neighbor timeout timer is 105 seconds.
Views
Interface view
Default command level
2: System level
Parameters
interval: Specifies a PIM neighbor timeout timer in seconds. The value ranges from 1 to 65535. A value
of 65535 makes the PIM neighbor always reachable.
Examples
# Set the PIM neighbor timeout timer to 120 seconds on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] pim hello-option holdtime 120
Related commands
hello-option holdtime
pim hello-option lan-delay
Use pim hello-option lan-delay to configure the LAN-delay time (namely, the length of time that the
device waits before forwarding a received prune message) on the current interface.
Use undo pim hello-option lan-delay to restore the default.
Syntax
pim hello-option lan-delay interval
undo pim hello-option lan-delay
Default
The LAN-delay time to 500 milliseconds.