F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

642
Views
Interface view
Default command level
2: System level
Parameters
interval: Specifies a LAN-delay time in milliseconds. The value ranges from 1 to 32767.
Examples
# Set the LAN-delay time to 200 milliseconds on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] pim hello-option lan-delay 200
Related commands
• hello-option lan-delay
• hello-option override-interval
• pim hello-option override-interval
pim hello-option neighbor-tracking
Use pim hello-option neighbor-tracking to disable join suppression (namely, enable neighbor tracking)
on the current interface.
Use undo pim hello-option neighbor-tracking to enable join suppression.
Syntax
pim hello-option neighbor-tracking
undo pim hello-option neighbor-tracking
Default
Join suppression is enabled. Namely, neighbor tracking is disabled.
Views
Interface view
Default command level
2: System level
Examples
# Disable join suppression on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0//1
[Sysname-GigabitEthernet0/1] pim hello-option neighbor-tracking
Related commands
hello-option neighbor-tracking
pim hello-option override-interval
Use pim hello-option override-interval to configure the prune override interval on the current interface.