F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

643
Use undo pim hello-option override-interval to restore the default.
Syntax
pim hello-option override-interval interval
undo pim hello-option override-interval
Default
The prune override interval is 2500 milliseconds.
Views
Interface view
Default command level
2: System level
Parameters
interval: Specifies a prune override interval in milliseconds. The value ranges from 1 to 65535.
Examples
# Set the prune override interval to 2000 milliseconds on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] pim hello-option override-interval 2000
Related commands
• hello-option lan-delay
• hello-option override-interval
• pim hello-option lan-delay
pim holdtime assert
Use pim holdtime assert to configure the assert timeout timer on the current interface.
Use undo pim holdtime assert to restore the default.
Syntax
pim holdtime assert interval
undo pim holdtime assert
Default
The assert timeout timer is 180 seconds.
Views
Interface view
Default command level
2: System level
Parameters
interval: Specifies an assert timeout timer in seconds. The value ranges from 7 to 2147483647.