F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

644
Examples
# Set the assert timeout timer to 100 seconds on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] pim holdtime assert 100
Related commands
• holdtime assert
• holdtime join-prune
• pim holdtime join-prune
pim holdtime join-prune
Use pim holdtime join-prune to configure the join/prune timeout timer on the interface.
Use undo pim holdtime join-prune to restore the default.
Syntax
pim holdtime join-prune interval
undo pim holdtime join-prune
Default
The join/prune timeout timer is 210 seconds.
Views
Interface view
Default command level
2: System level
Parameters
interval: Specifies a join/prune timeout timer in seconds. The value ranges from 1 to 65535.
Examples
# Set the join/prune timeout timer to 280 seconds on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] pim holdtime join-prune 280
Related commands
• holdtime assert
• holdtime join-prune
• pim holdtime assert
pim neighbor-policy
Use pim neighbor-policy to configure a legal source address range for hello messages to guard against
hello message spoofing.
Use undo pim neighbor-policy to restore the default.