F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

676
Hardware Value ran
g
e Default value
F5000 1 to 8192 8192
Firewall module
12500/10500: 1 to 2048
Other devices: 1 to 8192
12500/10500: 2048
Other devices: 8192
U200-A 1 to 8192 8192
U200-S 1 to 8192 8192
Examples
# On the public network, enable the device to cache a maximum of 100 (S, G) entries learned from its
MSDP peer 125.10.7.6.
<Sysname> system-view
[Sysname] msdp
[Sysname-msdp] peer 125.10.7.6 sa-cache-maximum 100
Related commands
• display msdp brief
• display msdp peer-status
• display msdp sa-count
peer sa-policy
Use peer sa-policy to configure a filtering rule for received or forwarded SA messages.
Use undo peer sa-policy to restore the default.
Syntax
peer peer-address sa-policy { import | export } [ acl acl-number ]
undo peer peer-address sa-policy { import | export }
Default
SA messages received or to be forwarded are not filtered, and all SA messages are accepted or
forwarded.
Views
Public network MSDP view
Default command level
2: System level
Parameters
import: Specifies the incoming direction.
export: Specifies the outgoing direction.
peer-address: Specifies an MSDP peer.
acl-number: Specifies an advanced ACL, in the range of 3000 to 3999. If you do not provide an ACL
number, all SA messages carrying (S, G) entries are filtered off.