F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

704
input packets missing pcb cache: 0
Sent packets:
Total: 0
Table 157 Command output
Field Descri
p
tion
Total Total number of received/sent packets.
checksum error Total number of packets with a checksum error.
shorter than header
Total number of IPv6 UDP packets whose total length is less than that
specified by the packet header.
data length larger than packet
Total number of packets whose data length exceeds that specified by
the packet header.
unicast(no socket on port) Total number of received unicast packets without any socket.
broadcast/multicast(no socket on port)
Total number of received broadcast/multicast packets without any
socket.
not delivered, input socket full
Number of packets not handled because of the receive buffer being
full.
input packet missing pcb cache Number of packets failing to match the protocol control block cache.
ipv6
Use ipv6 to enable IPv6.
Use undo ipv6 to disable IPv6.
Syntax
ipv6
undo ipv6
Default
IPv6 is disabled.
Views
System view
Default command level
2: System level
Examples
# Enable IPv6.
<Sysname> system-view
[Sysname] ipv6
ipv6 address
Use ipv6 address to configure an IPv6 global unicast address for an interface.
Use undo ipv6 address to remove the IPv6 address from the interface.