F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

710
Default
Load sharing based on polling is adopted. ECMP routes are used in turn to forward packets.
Views
System view
Default command level
2: System level
Examples
# Enable load sharing based on the HASH algorithm for packet forwarding.
<Sysname> system-view
[Sysname] ipv6 fib-loadbalance-type hash-based
ipv6 hoplimit-expires enable
Use ipv6 hoplimit-expires enable to enable sending ICMPv6 Time Exceeded packets.
Use undo ipv6 hoplimit-expires to disable sending ICMPv6 Time Exceeded packets
Syntax
ipv6 hoplimit-expires enable
undo ipv6 hoplimit-expires
Default
Sending ICMPv6 Time Exceeded packets is enabled.
Views
System view
Default command level
2: System level
Usage guidelines
After you disable sending ICMPv6 Time Exceeded packets, the device still sends Fragment Reassembly
Time Exceeded packets.
Examples
# Disable sending ICMPv6 Time Exceeded packets.
<Sysname> system-view
[Sysname] undo ipv6 hoplimit-expires
ipv6 icmp-error
Use ipv6 icmp-error to configure the size and update period of the token bucket.
Use undo ipv6 icmp-error to restore the defaults.
Syntax
ipv6 icmp-error { bucket bucket-size | ratelimit interval } *
undo ipv6 icmp-error