F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

738
Views
Any view
Default command level
1: Monitor level
Parameters
all: Display IPv6 address conflict information for the public network and all VPNs.
vpn-instance vpn-instance-name: Displays IPv6 address conflict information for the VPN. The
vpn-instance-name argument represents a VPN by its name, a case-sensitive string of 1 to 31 characters.
To display IPv6 address conflict information for the public network, do not specify this parameter.
address ipv6-address: Displays the conflict information about a specific IPv6 address.
pool pool-number: Displays the IPv6 address conflict information about the DHCPv6 address pool
specified by the pool number. The value ranges from 1 to 128.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display all IPv6 address conflict information.
<Sysname> display ipv6 dhcp server conflict all
Total number: 4
VPN instance: Public network
Address Detect time
1:2::1 Nov 23 2010 16:37:08
1:2::2 Nov 23 2010 16:37:08
1:2::3 Nov 23 2010 16:37:08
1:2::4 Nov 23 2010 16:37:08
--- total 4 entries ---
Table 162 Command output
Field Descri
p
tion
Total number Total number of conflicted addresses.
VPN instance
Name of the VPN instance. Public network is displayed if the
address conflict information is on the public network.
Address IPv6 address that conflicted with another IPv6 address.
Detect time Time when the conflict was detected.
Related commands
reset ipv6 dhcp server conflict