F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

744
Field Descri
p
tion
Type
Type of a prefix binding:
• Static(F)—Free static binding, indicating the static prefix has not been assigned to
the client.
• Static(O)—Offered static binding. If the server replies with an Advertise message to
the client during the four-step message exchange, the server sets the type of the
static binding configured for the client to Static(O).
• Static(C)—Committed static binding, indicating the static IPv6 prefix has been
assigned to the client in a Reply message.
• Auto(O)—Offered dynamic binding. If the server selects a dynamic IPv6 prefix and
replies with an Advertise message to the client during the four-step message
exchange, the server sets the type of the dynamic IPv6 prefix binding to Auto(O).
• Auto(C)—Committed dynamic binding, indicating the dynamic IPv6 prefix has
been assigned to the client in a Reply message.
Pool Address pool to which the prefix binding belongs.
Expiration time
Time when the prefix lease expires. If the lease expires after the year 2100, this field
displays "after 2100." For a free static binding, this field displays "Not-available."
Prefix Pool
Prefix pool to which the prefix binding belongs. For a free static binding, this field
displays null.
Client IPv6 address of the DHCPv6 client. For a free static binding, this field displays null.
DUID Client DUID.
IAID Client IAID. For a free static binding without IAID configured, this field displays null.
Preferred lifetime Preferred lifetime of the prefix, in seconds.
valid lifetime Valid lifetime of the prefix, in seconds.
Will expire at
Time when the prefix lease will expire. If the lease expires after the year 2100, this
field displays Will expire after 2100.
display ipv6 dhcp server statistics
Use display ipv6 dhcp server statistics to display packet statistics on the DHCPv6 server.
Syntax
display ipv6 dhcp server statistics [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.