F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

746
Syntax
dns-server ipv6-address
undo dns-server ipv6-address
Default
No DNS server address is specified.
Views
DHCPv6 address pool view, DHCPv6 option group view
Default command level
2: System level
Parameters
ipv6-address: IPv6 address of a DNS server.
Usage guidelines
You can configure multiple DNS server addresses by using the dns-server command repeatedly.
You can configure up to eight DNS servers in an address pool.
The precedence of the specified DNS servers depends on the configuration sequence. The formerly
specified DNS server takes precedence over the latter one.
Examples
# Specify the DNS server address to be assigned to the client as 2:2::3.
<Sysname> system-view
[Sysname] ipv6 dhcp pool 1
[Sysname-dhcp6-pool-1] dns-server 2:2::3
domain-name
Use domain-name to configure the domain name suffix for the client.
Use undo domain-name to remove the configuration.
Syntax
domain-name domain-name
undo domain-name
Default
No domain name suffix is configured for the client.
Views
DHCPv6 address pool view, DHCPv6 option group view
Default command level
2: System level
Parameters
domain-name: Domain name suffix, a string of 1 to 50 characters.
Usage guidelines
You can configure only one domain name suffix in an address pool.