F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

749
[Sysname] ipv6 prefix 3 88:99::/32
[Sysname] ipv6 dhcp pool 1
[Sysname-dhcp6-pool-1] network prefix 3
# Create an IPv6 prefix 88:99::/32 with the ID 3. Specify the IPv6 prefix in address pool 1 and specify
the sub-prefix and sub-prefix length as 3ffe:501:ffff:100::/64. The DHCPv6 server assigns addresses in
the subnet 88:99:ffff:100::/64 with the prefix length 64. The first 32-bit prefix is determined by the prefix
3 and the last 2-bit prefix is determined by the sub-prefix.
<Sysname> system-view
[Sysname] ipv6 prefix 3 88:99::/32
[Sysname] ipv6 dhcp pool 1
[Sysname-dhcp6-pool-1] network prefix 3 3ffe:501:ffff:100::/64
Related commands
• display ipv6 dhcp pool
• ipv6 dhcp client pd
• ipv6 prefix
ipv6 dhcp option-group
Use ipv6 dhcp option-group to create a static DHCPv6 option group, and enter its view.
Use undo ipv6 dhcp option-group to delete the specified static DHCPv6 option group.
Syntax
ipv6 dhcp option-group option-group-number
undo ipv6 dhcp option-group option-group-number
Default
No DHCPv6 option group is configured on the device.
Views
System view
Default command level
2: System level
Parameters
option-group-number: Assign an ID to the static option group, in the range of 1 to 100.
Usage guidelines
The DHCPv6 option group ID must be globally unique on the device. Do not assign the ID of a dynamic
DHCPv6 option group to a static option group.
Examples
# Create a static DHCPv6 option group 1, and enter its view.
<Sysname> system-view
[Sysname] ipv6 dhcp option-group 1
[Sysname-dhcp6-option-group1]
Related commands
• ipv6 address dhcp-alloc